304不繡鋼1.4313是馬氏體級，耐金屬灼傷高朝，熱運行后耐久性性好。X3CrNiMo13-4鋼的機制效果是根據耐灼傷基本成分中鉬和鎳的高酸度。某些碳素鋼增多劑約束了增多級碳酸度的可以——給定酸度等于于奧氏體304不繡鋼。或許鎳酸度較低，但鎳酸度約為4%，偏態加強了鋼對幾種金屬灼傷場景的承受力——三次機制效果。X3CrNiMo13-4鋼業主可運行高至300℃在高溫下運行的機件和機件，及其曝露在幾種金屬灼傷場景中的機件，同時控制至少的面上要求括抗氯化物特征)。QT650.QT780和QT900要求下，熱運行后最經常交付使用矩形鋼。半加工設備代替石油氣運行.化學工業.在冶金機械和綠色能源產業，渦輪增壓機曝露在高溫順溫度下.泵.收縮機部件。鋼不是合焊接工藝。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50出售EN1.4313馬氏體冷庫保溫隔熱板的表層存在降溫性狀（+A）階段、回火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，需用哪一位必要要跟業務部說了解哦。